| Quantity | 1+ | 25+ | 100+ | | Price for each | $6.05 | $5.51 | $4.51 | | Your savings | - | 9% | 25% |
|
Quantity:
Peel ply release film is similar to a rip stop nylon. It has the texture of a finely woven cloth when you remove it. It produces great secondary bonding properties on the composite part. You can reuse peel ply if you're careful but most people choose not to.
We know our peel ply is a bit more expensive than one of our competitors and we usually try to keep the lowest cost products on our website. However, cheap peel plys don't work. For a few cents more, you can save yourself a lot of bloody knuckles pulling parts.
Our peel ply is much easier to remove than some of the lower-grade peel plys as we ensure we have a special release coating over the polyester to facilitate easier removal.
For a cleaner matter finish and an easier removal, please take a look at our PTFE release film.
For a gloss finish please take a look at our perforated plastic release film.
Color: White/Off-White
Width: 60"
Maximum Use Temp: 350F
|